When to Replace Shocks

Perhaps the better question is “How well do you want your vehicle to perform?” If you can answer that question, the decision about “when to replace” becomes much easier. The simple answer then becomes a matter of choice:

OPTIONAL

UPGRADE

If you want more handling and control than your vehicle design is currently capable of: Right now is the right time.

MAINTENANCE

SUGGESTED AS MAINTENANCE

If you want to keep your vehicle operating as well as it was designed to: Then KYB and most industry experts suggest replacement shocks and struts after 50,000 miles (80,000 km).

TO RESTORE

CONDITIONS-
BASED

If your vehicle has excessive ride control conditions such as nose-dive or harshness: Right now is the right time.

NECESSITY

REPAIR

If your shocks and struts are damaged, causing tire cupping or leaking to the point of dripping: Then you have failed units and replacements become required at this time.


TO FURTHER SIMPLIFY THE REASONS TO REPLACE:

1. UPGRADE

Vehicles are generally designed to handle a broad range of purposes: Passenger ride comfort on one side, load and terrain capabilities on the other. When your typical use of a vehicle sometimes or always stresses heavier loads, top heavy, towing or off-road conditions, you may want to consider replacing the shocks with units that exceed original equipment capabilities. KYB offers many higher-performing “Monotube” shocks for this purpose.

2. MAINTENANCE

Even on well paved roads the shocks can move up or down 1,500 to 1,900 times every mile: In 50,000 miles that can exceed 75 million cycles. Over time, performance tends to decrease gradually and the motorist usually doesn’t realize how much handling and control is lost. Replacing shocks and struts after 50,000 miles can keep the vehicle performing as well as it was designed and extend its life expectancy.

3. DOESN’T PERFORM WITHIN VEHICLE DESIGN

Worn shocks and struts eventually causes ride control conditions to worsen to a degree that impairs the drivers ability to control the vehicle. Road testing and vehicle inspections by a qualified technician every 12,000 miles is recommended to identify and keep the motorist informed about these conditions.

4. REPLACE FAILED SHOCKS

Shock or strut failures are a driving safety hazard. If you can’t control your vehicle, then it controls you. Evidence of failures includes things like; excessive bounce, units leaking to the point of fluid dripping, tires that are cupping and visual component damage.

A “COMPLETELY FAILED” SHOCK OR STRUT MAY:

  • Leak hydraulic fluid.
  • Cause uneven or cupped tire wear.
  • Create unsafe driving conditions.
  • Make knocking noises or rattles.
  • Create vehicle swaying and require constant steering corrections

Comments

Popular posts from this blog

Honda CR-Z Specification & Maintenance

Upgrade your Perodua Aruz with the KYB RS Ultra Absorber for unparalleled performance, enhanced safety, and durability. Don't miss out on this must-buy suspension system.

The Best Absorber for Your Toyota Avanza 1st Model: Zer0ne Sports Absorber